SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Used Parts for Forklift
Used Forklift Parts - Inevitably, lift truck components will eventually wear out and need replacing. The option of buying new parts can become costly so one more idea is to acquire used parts. This can save a lot of cash in the long run. It is a good idea to acquire used forklift parts which have been remanufactured. These components will ensure that you are getting parts that will work for a long time and be productive.
Remanufacturing broken and worn out components is a less expensive way in general compared to rebuilding. With rebuilding components, only the components that are worn out or broken get changed, which means that other wearable components could break down soon after acquisition.
Remanufacturing however offers the best assurance for used components. Reproduced parts are taken apart and cleaned and then all wearable pieces are replaced. All wearable parts are replaced regardless of age or wear which is one more reason why remanufactured parts overall run so much better. Any component within the part is brand new and this provides much longer life to the used part. Depending on the lift truck parts which are being redone, the cleaning process and the complete remanufacturing process would differ.
The engines are cleaned after a complete disassembly. Several engine components like pistons, spark plugs, rings, valve springs, filters, and valves can be replaced during the process of remanufacturing. The engines are hot tested after reassembly to ensure that there are no noise, no oil pressure problems, no leaks or any vacuum.
Transmissions are another item which is oven cleaned after being disassembled. The transmission is then washed. A comprehensive examination is performed to be able to check for any cracks. Seals, bearings and bushings are all replaced. Normally, the replacement components utilized on transmission components meet OEM specifications.
Some forklift parts such as the water pump, torque converters, the alternator, steer axles and the starter can be quite serviceable after worn parts are replaced. The electronic control in the electric forklift is maintained by the control card. This particular card could also be reproduced with replacing all aged and worn out components. Not like different lift truck components the control card could only have the worn and aged parts replaced.
Remanufactured parts are comprehensively inspected upon reassembly to guarantee they are in top condition before being sold. It is vital when buying reproduced parts to make certain they have undergone the proper testing and inspection procedures. On certain bigger components such as transmissions, steer axles and engines, OEM specification replacement parts must be utilized.
The forklift dealer can guarantee that the components they have reproduced meet the OEM specifications. This would likewise guarantee the components meet industry standards. Many details go into remanufacturing second-hand parts. This attention to detail provides more serviceability out of reproduced components compared to the parts that were merely rebuilt.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
New Haven, Connecticut
forkliftpartsnewhaven.com
Email Us
About Us